// Place your settings in the file "Packages/User/Preferences.sublime-settings",
// which overrides the settings in here.
//
// Settings may also be placed in syntax-specific setting files, for
// example, in Packages/User/Python.sublime-settings for python files.
{
    // Sets the colors used within the text area.
    // The value "auto" will switch between the "light_color_scheme" and
    // "dark_color_scheme" based on the operating system appearance.
    "color_scheme": "Mariana.sublime-color-scheme",

    // Controls the "color_scheme" when set to "auto"
    "light_color_scheme": "Breakers.sublime-color-scheme",
    "dark_color_scheme": "Mariana.sublime-color-scheme",

    // Note that the font_face and font_size are overridden in the platform
    // specific settings file, for example, "Preferences (Linux).sublime-settings".
    // Because of this, setting them here will have no effect: you must set them
    // in your User File Preferences.
    "font_face": "Consolas",
    "font_size": 16,
    // The font size set when using "Reset Size"
    "default_font_size": 10,

    // Valid options on all platforms are:
    //  - "no_bold": Disables bold text
    //  - "no_italic": Disables italic text
    // Antialiasing options:
    //  - "no_antialias": Disables antialiasing
    //  - "gray_antialias": Uses grayscale antialiasing instead of subpixel
    // Ligature options:
    //  - "no_liga": Disables standard ligatures (OpenType liga feature)
    //  - "no_clig": Disables contextual ligatures (OpenType clig feature)
    //  - "no_calt": Disables contextual alternatives (OpenType calt feature)
    //  - "dlig": Enables discretionary ligatures (OpenType dlig feature)
    //  - "ss01": Enables OpenType stylistic set 1. Can enable sets 1 to 10
    //        by changing the last two digits.
    // Windows-only options:
    //  - "directwrite": (default) Use DirectWrite for font rendering
    //  - "gdi": Use GDI for font rendering
    //  - "dwrite_cleartype_classic": Only applicable to "directwrite" mode,
    //        should render fonts similar to traditional GDI
    //  - "dwrite_cleartype_natural": Only applicable to "directwrite" mode,
    //        should render fonts similar to ClearType "natural quality" GDI
    //  - "subpixel_antialias": Force ClearType antialiasing when disabled
    //        at system level
    // Mac-only options:
    //  - "no_round": Don't round glyph widths for monospace fonts when
    //        "font_size" is small.
    "font_options": [],
    // Font options for theme text. Valid options are the same as
    // "font_options", except "no_bold" and "no_italic" are not supported
    "theme_font_options": [],

    // Characters that are considered to separate words
    "word_separators": "./\\()\"'-:,.;<>~!@#$%^&*|+=[]{}`~?",

    // Characters that are considered to separate sub-words
    "sub_word_separators": "_",

    // Set to false to prevent line numbers being drawn in the gutter
    "line_numbers": true,

    // Set to false to hide the gutter altogether
    "gutter": true,

    // Spacing between the gutter and the text
    "margin": 4,

    // Fold buttons are the triangles shown in the gutter to fold regions of text
    "fold_buttons": true,

    // Hides the fold buttons unless the mouse is over the gutter
    "fade_fold_buttons": true,

    // The style of code folding to use
    // - "auto": Use whatever the default is for the syntax in use
    // - "force_indentation": Always use indentation-based code folding
    // - "scope_only": Only allow syntax-based code folding
    "fold_style": "auto",

    // Indicate modified lines in the gutter
    // - true: Enables modified line indicators on all files
    // - "auto": Enables modified line indicators on tracked files within Git
    // - false: Disables modified line indicators
    "mini_diff": true,

    // Columns in which to display vertical rulers. Each entry may also be a
    // list of the column, the ruler style and optionally the ruler width, for
    // example: [[80, "solid", 2], 78, [90, "dotted"]]
    "rulers": [4,8,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68,72,76,80,84,88,92,96,98,102,106,110,114,118,122,126],

    // Controls how ruler lines are drawn
    // - "dotted": Drawn as a dotted line
    // - "stippled": Drawn as a stippled line
    // - "solid": Drawn as a solid line
    "ruler_style": "dotted",

    // Controls how wide ruler lines are drawn
    "ruler_width": 1.0,

    // Set to true to turn spell checking on by default
    "spell_check": false,

    // The number of spaces a tab is considered equal to
    "tab_size": 4,

    // Set to true to insert spaces when tab is pressed
    "translate_tabs_to_spaces": true,

    // If translate_tabs_to_spaces is true, use_tab_stops will make tab and
    // backspace and delete insert/delete up to the next tabstop
    "use_tab_stops": true,

    // Set to false to disable detection of tabs vs. spaces on load
    "detect_indentation": true,

    // Calculates indentation automatically when pressing enter
    "auto_indent": true,

    // Makes auto indent a little smarter, e.g., by indenting the next line
    // after an if statement in C. Requires auto_indent to be enabled.
    "smart_indent": true,

    // Adds whitespace up to the first open bracket when indenting. Requires
    // auto_indent to be enabled.
    "indent_to_bracket": false,

    // Trims white space added by auto_indent when moving the caret off the
    // line.
    "trim_automatic_white_space": true,

    // Disables horizontal scrolling if enabled.
    // May be set to true, false, or "auto", where it will be disabled for
    // source code, and otherwise enabled.
    "word_wrap": "auto",

    // Set to a value other than 0 to force wrapping at that column rather than
    // the window width. See "wrap_width_style" for extra options.
    "wrap_width": 0,

    // Controls how the "wrap_width" setting is applied. The following options
    // are available:
    // - "constant": Always wrap at exactly the wrap width.
    // - "min": Wrap at the wrap width or less if there is less space available.
    "wrap_width_style": "constant",

    // Set to false to prevent word wrapped lines from being indented to the same
    // level
    "indent_subsequent_lines": true,

    // Draws text centered in the window rather than left aligned
    "draw_centered": false,

    // Controls auto pairing of quotes, brackets etc
    "auto_match_enabled": true,

    // Automatically close HTML and XML tags when </ is entered.
    "auto_close_tags": true,

    // Word list to use for spell checking. May also be a list of dictionaries.
    "dictionary": "Packages/Language - English/en_US.dic",

    // Sets which scopes are checked for spelling errors
    "spelling_selector": "markup.raw, source string.quoted - punctuation - meta.preprocessor.include, source comment - source comment.block.preprocessor, -(source, constant, keyword, storage, support, variable, markup.underline.link, meta.tag)",

    // Set to true to draw a border around the visible rectangle on the minimap.
    // The color of the border will be determined by the "minimap_border" key
    // in the color scheme
    "draw_minimap_border": true,

    // Always visualise the viewport on the minimap, as opposed to only
    // showing it on mouse over
    "always_show_minimap_viewport": true,

    // Whether the minimap should scroll horizontally to match the viewport.
    "minimap_horizontal_scrolling": true,

    // If enabled, will highlight any line with a caret
    "highlight_line": false,

    // If enabled, will highlight the gutter for any line with a caret
    "highlight_gutter": true,

    // If enabled, will highlight the line number in the gutter for any line
    // with a caret depending on the color scheme
    "highlight_line_number": true,

    // Valid values are "smooth", "phase", "blink" and "solid". Previous
    // versions of Sublime Text used "smooth" by default.
    "caret_style": "solid",

    // These settings control the size of the caret
    "caret_extra_top": 4,
    "caret_extra_bottom": 4,
    "caret_extra_width": 1,

    // When enabled, the caret will be drawn as a rectangle, using the width
    // of the current character
    "block_caret": false,

    // Set to false to disable underlining the brackets surrounding the caret
    "match_brackets": true,

    // Set to false if you'd rather only highlight the brackets when the caret is
    // next to one
    "match_brackets_content": true,

    // Set to false to not highlight square brackets. This only takes effect if
    // match_brackets is true
    "match_brackets_square": true,

    // Set to false to not highlight curly brackets. This only takes effect if
    // match_brackets is true
    "match_brackets_braces": true,

    // Set to false to not highlight angle brackets. This only takes effect if
    // match_brackets is true
    "match_brackets_angle": true,

    // Enable visualization of the matching tag in HTML and XML
    "match_tags": true,

    // Highlights other occurrences of the currently selected text
    "match_selection": true,

    // Additional spacing at the top of each line, in pixels
    "line_padding_top": 1,

    // Additional spacing at the bottom of each line, in pixels
    "line_padding_bottom": 1,

    // Set to false to disable scrolling past the end of the buffer.
    // On Mac, this value is overridden in the platform specific settings, so
    // you'll need to place this line in your user settings to override it.
    //
    // This setting may also be set to a number between 0.0 and 1.0 to specify
    // how much scrolling past the end of the buffer should be allowed. 0.5
    // scrolls halfway and 0.0 is the same as false.
    "scroll_past_end": true,

    // Set the number of context lines to show when scrolling to reveal. This
    // affects all selection changes, like selection dragging, page-up/page-down
    // and moving the caret.
    "scroll_context_lines": 0,

    // This controls what happens when pressing up or down when on the first
    // or last line.
    // On Mac, this value is overridden in the platform specific settings, so
    // you'll need to place this line in your user settings to override it.
    "move_to_limit_on_up_down": false,

    // Controls when white space is drawn. Any of the following options may be
    // combined:
    // - "selection": Draw white space under the current selection.
    // - "leading": Draw any white space between the beginning of a line and the
    //              first character.
    // - "enclosed": Draw white space enclosed by other characters.
    // - "trailing": Draw white space following the last character on a line.
    // - "isolated": Draw white space on lines containing no other characters.
    // - "all": All of the above, ie. always draw white space.
    //
    // These options may be further refined by appending any of the following
    // separated by an underscore:
    // - "none": Don't draw this kind of white space.
    // - "tabs": Only draw tabs here.
    // - "spaces": Only draw spaces here.
    // - "mixed": Only draw white space that does not match the indentation
    //            style. For example if "translate_tabs_to_spaces" is true only
    //            draw tabs.
    // - "mixed_tabs": Like "mixed" but only draw tabs.
    // - "mixed_spaces": Like "mixed" but only draw spaces.
    // - "all": Draw both tabs and spaces. This is the default.
    //
    // Note that options are applied in sequence. So a later option may override
    // an earlier one.
    //
    // Examples:
    // - ["selection", "trailing", "isolated"]:
    //     Draw white space at the end of any lines and under the selection.
    //
    // - ["all_tabs", "selection"]:
    //     Draw tabs anywhere and any white space under the selection.
    //
    // - ["all_mixed"]:
    //     Draw any white space that does not match the indentation style.
    //
    // - ["leading_mixed", "isolated_mixed"]:
    //     Draw any indentation that does not match the indentation style.
    //
    // - ["selection_mixed_tabs"]:
    //     Draw only tabs under the selection and only if the indentation style
    //     is spaces.
    //
    // - ["all_tabs", "selection"]:
    //     Draw all tabs and any white space under the selection.
    //
    // - ["all", "selection_none"]:
    //     Inverse of the default. Draw white space everywhere except under the
    //     selection.
    "draw_white_space": ["all"],

    // Controls how non-ascii white space is drawn.
    // - "none": Draw unicode white space verbatim, eg. hiding zero-width
    //           spaces.
    // - "punctuation": Draw codepoints of unicode white space defined as
    //                  punctuation. This includes NBSP, but excludes the CJK
    //                  Ideographic Space.
    // - "all": Draw codepoints of all non-ascii space characters.
    "draw_unicode_white_space": "all",

    // Controls whether unicode bidi characters are drawn as codepoints.
    "draw_unicode_bidi": true,

    // Control characters (or white space if enabled) can be drawn as either hex
    // or using their abbreviation:
    // - "hex": Draw characters using their hex encoding, ie. <0xA0>
    // - "names": Draw characters using their abbreviation, ie. <NBSP>
    "control_character_style": "hex",

    // Controls what type of columns selection description ("Line X, Column Y"
    // in the status bar) uses:
    // - "virtual": Count virtual columns. Tabs count as their width in spaces.
    // - "real": Count real columns. Tabs count as one column.
    "selection_description_column_type": "virtual",

    // Set to false to turn off the indentation guides.
    // The color and width of the indent guides may be customized by editing
    // the corresponding .tmTheme file, and specifying the colors "guide",
    // "activeGuide" and "stackGuide"
    "draw_indent_guides": true,

    // Controls how the indent guides are drawn. Options may be combined, with
    // valid options being:
    //  - "draw_normal" - will draw plain indent guides for every indentation
    //    group
    //  - "draw_active" - will draw indent guides for the group
    //    containing the caret in a different color
    //  - "draw_active_single" - will draw the right-most indent guide in the
    //    group containing the caret in a different color
    //  - "solid" - can be combined with any of the draw_* options to draw
    //    solid instead of stippled lines
    "indent_guide_options": ["draw_normal"],

    // Controls where trailing white space is removed on save.
    // - "none": Do not remove any trailing white space on save.
    // - "all": Remove all trailing white space on save.
    // - "not_on_caret": Only remove white space that won't affect the caret.
    //                   When used in conjunction with "save_on_focus_lost" and
    //                   certain desktop environments that frequently make the
    //                   application lose focus this avoids the caret jumping
    //                   around a lot.
    "trim_trailing_white_space_on_save": "all",

    // Only trim white space on save for the parts of a file that have been
    // modified by you. If there is trailing white space in other parts of the
    // file they are left alone.
    "trim_only_modified_white_space": true,

    // Set to true to ensure the last line of the file ends in a newline
    // character when saving
    "ensure_newline_at_eof_on_save": true,

    // Set to true to automatically save files when switching to a different file
    // or application
    "save_on_focus_lost": false,

    // The encoding to use when the encoding can't be determined automatically.
    // ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
    "fallback_encoding": "Western (Windows 1252)",

    // Encoding used when saving new files, and files opened with an undefined
    // encoding (e.g., plain ascii files). If a file is opened with a specific
    // encoding (either detected or given explicitly), this setting will be
    // ignored, and the file will be saved with the encoding it was opened
    // with.
    "default_encoding": "UTF-8",

    // Files containing null bytes are opened as hexadecimal by default
    "enable_hexadecimal_encoding": true,

    // Determines what character(s) are used to terminate each line in new files.
    // Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
    // 'unix' (LF only).
    "default_line_ending": "unix",

    // When enabled, hovering over a word will show a popup listing all
    // possible locations for the definition symbol. Requires index_files.
    "show_definitions": true,

    // When enabled, pressing tab will insert the best matching completion.
    // When disabled, tab will only trigger snippets or insert a tab.
    // Shift+tab can be used to insert an explicit tab when tab_completion is
    // enabled.
    "tab_completion": true,

    // Enable auto complete to be triggered automatically when typing.
    "auto_complete": true,

    // The maximum file size where auto complete will be automatically triggered.
    "auto_complete_size_limit": 4194304,

    // The delay, in ms, before the auto complete window is shown after typing
    "auto_complete_delay": 50,

    // Controls what scopes auto complete will be triggered in
    "auto_complete_selector": "meta.tag, source - comment - string.quoted.double.block - string.quoted.single.block - string.unquoted.heredoc",

    // Additional situations to trigger auto complete
    "auto_complete_triggers":
    [
        {"selector": "text.html, text.xml", "characters": "<",},
        {"selector": "punctuation.accessor", "rhs_empty": true,},
    ],

    // By default, auto complete will commit the current completion on enter.
    // This setting can be used to make it complete on tab instead.
    // Completing on tab is generally a superior option, as it removes
    // ambiguity between committing the completion and inserting a newline.
    "auto_complete_commit_on_tab": false,

    // Controls if auto complete is shown when snippet fields are active.
    // Only relevant if auto_complete_commit_on_tab is true.
    "auto_complete_with_fields": false,

    // Controls what happens when pressing the up key while the first item in
    // the auto complete window is selected: if false, the window is hidden,
    // otherwise the last item in the window is selected. Likewise for the
    // down key when the last item is selected.
    "auto_complete_cycle": false,

    // Auto complete will used indexed data to provide completions from other
    // files when this is enabled
    "auto_complete_use_index": true,

    // If previously-selected completions should be automatically selected
    "auto_complete_use_history": false,

    // Controls how the auto complete results are reordered when typing:
    // - "none" will fully reorder the results according to how well the
    //   completion matches the typed text.
    // - "some" will partially reorder the results, taking into account how
    //   well the completion matches whats typed, and likelihood of the
    //   completion.
    // - "strict" will never reorder the results.
    "auto_complete_preserve_order": "some",

    // Add trailing symbols (e.g., '.', '()') if the auto complete engine
    // thinks they're likely enough
    "auto_complete_trailing_symbols": true,

    // Add a space after completions if the auto complete engine thinks
    // they're likely enough
    "auto_complete_trailing_spaces": true,

    // Snippets will not be included in the auto complete when this is
    // false. They can still be triggered by typing their tab trigger in, and
    // pressing tab when auto complete is not showing.
    "auto_complete_include_snippets": true,

    // When this is set to false, snippets won't be present in the auto
    // complete dialog when typing, instead they'll only be shown in the auto
    // complete dialog when it's explicitly triggered
    "auto_complete_include_snippets_when_typing": true,

    // Syntax will not be detected for files larger than this size. This makes
    // loading large files significantly faster. Set to 0 to always perform
    // syntax detection. The default is 16MiB.
    "syntax_detection_size_limit": 16777216,

    // A list of wildcard patterns specifying which snippet files to ignore.
    // For example, to ignore all the default C++ snippets, set this to
    // ["C++/*"]
    "ignored_snippets": [],

    // These settings hide various parts of the UI automatically when typing.
    // Moving the mouse will show them again.
    "auto_hide_menu": false,
    "auto_hide_tabs": false,
    "auto_hide_status_bar": false,

    // Related to auto_hide_tabs, if this is enabled, tabs will be momentarily
    // displayed when switching files. Tabs will automatically hidden upon
    // resuming typing or after a fixed amount of time.
    "reveal_tabs_with_timeout": false,

    // When false, disables alt-tapping revealing the menu when hidden on Linux
    // and Windows. Does not affect auto hiding or toggling the menu through
    // the command palette.
    "reveal_menu": true,

    // If true, when typing the mouse pointer/cursor will be hidden. Moving the
    // pointer will unhide it. This setting has no effect on macOS.
    "hide_pointer_while_typing": true,

    // By default, shift+tab will only unindent if the selection spans
    // multiple lines. When pressing shift+tab at other times, it'll insert a
    // tab character - this allows tabs to be inserted when tab_completion is
    // enabled. Set this to true to make shift+tab always unindent, instead of
    // inserting tabs.
    "shift_tab_unindent": true,

    // If true, the copy and cut commands will operate on the current line
    // when the selection is empty, rather than doing nothing.
    "copy_with_empty_selection": true,

    // If true, the selected text will be copied into the find panel when it's
    // shown.
    // On Mac, this value is overridden in the platform specific settings.
    "find_selected_text": true,

    // If true, patterns copied from selected text to the find panel will
    // automatically be escaped when doing a regex search.
    "regex_auto_escape": true,

    // When auto_find_in_selection is enabled, the "Find in Selection" flag will
    // be enabled automatically when multiple lines of text are selected.
    // "find_only" or "replace_only" may also be used to only enable this
    // behavior for the find or replace panel respectively.
    "auto_find_in_selection": false,

    // This determines whether the find panel is closed when the "Find All"
    // or "Replace All" buttons are pressed. Note this does not change the
    // keybinding behavior.
    "close_find_after_find_all": true,
    "close_find_after_replace_all": true,

    // Whether to highlight find results in the scrollbar
    "highlight_find_results_in_scrollbar": true,

    // The maximum number of find results to show in the scroll bar. If this
    // number is exceeded no results will be shown. Use 0 to remove this limit.
    "find_scroll_highlights_limit": 8192,

    // The maximum file size that the "Highlight matches" option is used for.
    // Highlighting all matches requires searching the whole file while typing
    // the search query which can quickly get slow. Use 0 to remove this limit.
    "find_highlight_matches_max_size": 16777216, // 16MiB

    // Same as "find_highlight_matches_max_size" but used when regex is enabled.
    "find_regex_highlight_matches_max_size": 1048576, // 1MiB

    // The maximum output size for find-in-files. Prevents searches with a large
    // number of results from using too much memory. Use 0 to remove this limit.
    "find_in_files_max_result_size": 16777216, // 16MiB

    // Files over this size will be skipped. This prevents searches from using
    // up all available memory when large files are present. Note that on
    // computers with many cores more than one file will be loaded at once. Use
    // 0 to remove this limit.
    "find_in_files_max_file_size": 104857600, // 100MiB

    // Open search results from find in files buffer side-by-side.
    "find_in_files_side_by_side": false,

    // The number of context lines to show for each result
    "find_in_files_context_lines": 2,

    // The number of characters within the line surrounding each result to
    // display beyond which text is omitted. A value of 0 will remove any limit.
    "find_in_files_context_characters": 300,

    // Error messages from failing to open and search files will be suppressed
    // from results
    "find_in_files_suppress_errors": false,

    // When drag_text is enabled, clicking on selected text will begin a
    // drag-drop operation.
    "drag_text": true,

    // Take focus when a file is dragged and dropped onto Sublime Text. On
    // Windows this value is overidden to true in the platform specific
    // settings.
    "focus_on_file_drop": false,

    //
    // User Interface Settings
    //

    // The theme controls the look of Sublime Text's UI (buttons, tabs, scroll
    // bars, etc)
    // The value "auto" will switch between the "light_theme" and "dark_theme"
    // based on the operating system appearance.
    "theme": "auto",

    // Controls the "theme" when to "auto"
    "light_theme": "Default.sublime-theme",
    "dark_theme": "Default Dark.sublime-theme",

    // Adaptive theme only: controls if a custom or default title bar is used.
    // Note that on Windows, the hamburger menu is used whenever this is
    // enabled and the adaptive theme is in use.
    "themed_title_bar": true,

    // Controls the style of file tabs for the Default, Default Dark, and
    // Adaptive themes.
    // Options: "rounded", "square"
    //   The value "angled" provides the tab style from Sublime Text 3, but is
    //   only compatible with the Default and Adaptive themes, and will not
    //   support new features like inactive pane dimming.
    "file_tab_style": "rounded",

    // If inactive sheets should have their background slightly modified to
    // make input focus more obvious.
    "inactive_sheet_dimming": true,

    // Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
    // scroll slower, or set to larger than 1 to scroll faster
    "scroll_speed": 1.0,

    // Controls sidebar animation when expanding or collapsing folders
    "tree_animation_enabled": true,

    // Controls animation throughout the application
    "animation_enabled": true,

    // Makes tabs with modified files more visible
    "highlight_modified_tabs": true,

    // Hides the tab close button when false
    "show_tab_close_buttons": true,

    // Determines which side the close button is on
    "show_tab_close_buttons_on_left": false,

    // Show folders in the sidebar in bold
    "bold_folder_labels": false,

    // Draw divider lines between sections of the UI when using the Adaptive theme
    "adaptive_dividers": false,

    // Draw shadows under popup windows
    "popup_shadows": true,

    // Mac only. Controls use of macOS tabs in 10.12 and newer. Each native tab
    // contains an entire project, thus allowing multiple projects in a single
    // window. Valid values are "system", "preferred" and "disabled".
    "native_tabs": "system",

    // Whether new tabs should favor opening after the current tab or at the end
    // of the list of tabs.
    "open_tabs_after_current": true,

    // Valid values are "system", "enabled" and "disabled"
    "overlay_scroll_bars": "system",

    // Allows tabs to scroll left and right, instead of simply shrinking
    "enable_tab_scrolling": true,

    // Hides the buttons for scrolling tabs left/right, requiring use of a
    // trackpad or mouse scroll wheel
    "hide_tab_scrolling_buttons": false,

    // Hides the new tab button
    "hide_new_tab_button": false,

    // Display the toggle sidebar button in the status bar
    "show_sidebar_button": true,

    // Move the sidebar on the right side
    "sidebar_on_right": false,

    // Display the git status in the status bar, requires the show_git_status
    // setting to be enabled
    "show_git_status_in_status_bar": true,

    // Display file encoding in the status bar
    "show_encoding": true,

    // Display line endings in the status bar
    "show_line_endings": true,

    // Display indentation in the status bar
    "show_indentation": true,

    // Display syntax in the status bar
    "show_syntax": true,

    // Show Line, Column in the status bar in full length, compact or completely
    // hidden. Valid values are "enabled", "compact" and "disabled"
    "show_line_column": "enabled",

    // Display misspelled words in the status bar
    "show_spelling_errors": true,

    // Magnifies the entire user interface. Sublime Text must be restarted for
    // this to take effect. 1.0 is normal scale, 0.0 allows for auto-detection
    // based on text scale with older Linux configurations that don't fully
    // support GTK display scaling.
    "ui_scale": 0.0,

    // Enables hardware accelerated rendering. This moves rendering to your GPU,
    // allowing for faster rendering at higher resolutions. Changing this
    // setting requires an application restart to take effect.
    // - "none": Performs CPU rendering.
    // - "opengl": Uses OpenGL for rendering. Minimum required version is 4.1
    //
    // On Mac, this value is overridden in the platform specific settings.
    "hardware_acceleration": "none",

    //
    // Application Behavior Settings
    //

    // Exiting the application with hot_exit enabled will cause it to close
    // immediately without prompting. Unsaved modifications and open files will
    // be preserved and restored when next starting.
    //
    // Hot exit has different modes to choose from:
    // - "always": Always perform a hot exit when the application exits. This
    //             includes when the last window is closed on relevant
    //             platforms.
    // - "only_on_quit": Only perform a hot exit when the application is asked
    //                   to exit, not when the last window is closed. This
    //                   setting is only used on Windows and Linux.
    // - "disabled": Disable hot exit.
    "hot_exit": "always",

    // Closing projects with hot_exit_projects enabled will cause it to close
    // immediately without prompting. Unsaved modifications and open files will
    // be preserved in the workspace file and restored when reopened.
    "hot_exit_projects": true,

    // remember_full_screen will allow Sublime Text to start in full screen
    // mode if it was exited in full screen mode. When set to false, Sublime
    // Text will never start in full screen mode.
    "remember_full_screen": false,

    // remember_workspace makes Sublime Text remember what workspace each window
    // was in last. When set to false the OS left to determine which workspace
    // a window is opened in. This doesn't work with Wayland.
    "remember_workspace": true,

    // remember_layout makes Sublime Text start with the same layout it closed
    // with. Only applies when hot_exit is disabled.
    "remember_layout": true,

    // Whether the system's native recent files/folders list should be updated
    // by Sublime Text.
    "update_system_recent_files": true,

    // Mac only. If the user's default shell should be invoked to obtain the
    // user's customized environment variables. May be a boolean, or a string
    // of the path the shell to invoke. Sublime Text must be restarted for this
    // to take effect.
    "shell_environment": true,

    // Whether to reload a file if it has changed on disk.
    "reload_file_on_change": true,

    // Always prompt before reloading a file, even if the file hasn't been
    // modified. If a file has unsaved changes, a prompt will always be shown.
    // Will only show if "reload_file_on_change" is true.
    "always_prompt_for_file_reload": false,

    // Whether to reload files when Sublime Text is not in focus.
    "reload_file_in_background": false,

    // When reopening Sublime Text close saved files that have been deleted from
    // the filesystem (Unsaved files will not be closed). If this setting is
    // false no files will be closed, instead they will be restored as empty
    // files.
    //
    // This is useful when working from an unstable networked file system where
    // tabs would be lost if the connection wasn't active.
    "close_deleted_files": true,

    // When files are opened from a file explorer or from the command line, this
    // controls whether a new window is created or not.
    // - "never": Never open a new window unless no window is open.
    // - "always": Always open files in a new window.
    // - "finder_only": (macOS only) Only open files in a new window when
    //                  opening them from finder or dragging onto the dock icon.
    //
    // On Mac, this value is overridden in the platform specific settings.
    "open_files_in_new_window": "never",

    // Mac only: This controls if an empty window is created at startup or not.
    "create_window_at_startup": true,

    // Mac only: Show recent files on the Touch Bar.
    "show_navigation_bar": true,

    // Mac only: Use global find clipboard.
    "use_find_clipboard": true,

    // Set to true to close windows as soon as the last file is closed, unless
    // there's a folder open within the window.
    // On Mac, this value is overridden in the platform specific settings, so
    // you'll need to place this line in your user settings to override it.
    "close_windows_when_empty": false,

    // Show the full path to files in the title bar. On Mac, this value is
    // overridden in the platform specific settings, with a default value of
    // false.
    "show_full_path": true,

    // Show the relative path to files in the title bar. This overrides
    // show_full_path for files that are listed in the sidebar, however
    // show_full_path is still used for other files.
    "show_rel_path": false,

    // Show "project - file" or "file - project" in the title bar.
    "show_project_first": false,

    // Shows the Build Results panel when building. If set to false, the Build
    // Results can be shown via the Tools/Build Results menu.
    "show_panel_on_build": true,

    // Shows build errors just under the line on which they occur.
    "show_errors_inline": true,

    // Shows git repository information next to files in sidebar and in
    // the status bar. Sublime Text has to be restarted for this to take
    // effect.
    "show_git_status": true,

    // Enables showing git status for a git repository in the user's home
    // directory. This is disabled by default since it is typically accidental
    // and can cause heavy CPU usage related to file system watches.
    "allow_git_home_dir": false,

    // This setting determines whether tracked Git files should be diffed
    // against the index or HEAD.
    // Valid values are "index" or "head"
    "git_diff_target": "index",

    // The path to the Sublime Merge executable. This should only be set if
    // Sublime Merge is not installed in a standard location, such as when
    // using a portable install. Set to 'null' to hide Sublime Merge
    // integrations.
    "sublime_merge_path": "",

    // Preview file contents when clicking on a file in the sidebar. Double
    // clicking or editing the preview will open the file and assign it a tab.
    // - true: Always preview on click, including right click
    // - false: Never preview
    // - "only_left": Only preview on left click, right click will change the
    //                selection but not preview the file.
    "preview_on_click": true,

    // Controls the behavior when clicking on a single file in the sidebar
    // that's already open.
    // - true: If the file is already open in any group it will be selected.
    // - false: Only if the file is open in the focused group will it be
    //          selected, otherwise a new view into the file is opened.
    "select_across_groups": false,

    // Controls the maximum number of lines kept in the console's history. Note
    // a large limit will increase memory usage. Use 0 to remove any limit.
    "console_max_history_lines": 3000,

    // folder_exclude_patterns and file_exclude_patterns control which files are
    // listed in folders on the sidebar. These can also be set on a per-
    // project basis.
    "folder_exclude_patterns": [".svn", ".git", ".hg", "CVS", ".Trash", ".Trash-*"],
    "file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", ".directory", "desktop.ini", "*.class", "*.psd", "*.db", "*.sublime-workspace"],
    // These files will still show up in the sidebar, but won't be included in
    // Goto Anything or Find in Files
    "binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],

    // Files that will be opened as an image rather than a text file. Files can
    // still be opened as either text or an image vie the File menu
    "image_file_patterns": ["*.jpeg", "*.jpg", "*.gif", "*.png", "*.ico", "*.bmp", "*.tga", "*.psd", "*.ppm", "*.pgm", "*.webp", "*.hdr"],

    // File indexing parses all files in the sidebar, and builds an index of
    // their symbols. This is required for Goto Definition to work.
    "index_files": false,

    // Set the number threads to use for indexing. A value of 0 will make
    // Sublime Text guess based on the number of cores. Use the index_files
    // setting to disable all workers. This requires a restart to take effect.
    "index_workers": 1,

    // Sets whether the indexer should exclude files ignored by git.
    "index_exclude_gitignore": true,

    // Whether unknown file extensions should be checked for indexing or skipped
    // entirely. If a file extension is not being recognised we suggest
    // setting/changing the default syntax for that extension instead of turning
    // this setting off.
    "index_skip_unknown_extensions": true,

    // index_exclude_patterns indicate which files won't be indexed.
    "index_exclude_patterns": ["*.log"],

    // Determines whether Goto Anything should exclude files ignored by git.
    "goto_anything_exclude_gitignore": false,

    // Preview file contents in Goto Anything
    "goto_anything_file_preview": true,

    // When Vintage, the vi emulation package, is enabled
    // (see ignored_packages, below), this setting controls if files are opened
    // in command mode or insert mode by default
    "vintage_start_in_command_mode": false,

    // Yank commands can place the text in either an internal register, or in
    // the system clipboard.
    "vintage_use_clipboard": false,

    // By default Vintage will interpret all ctrl+<key> key bindings as
    // regular Sublime Text key bindings. Set this to true to make ctrl keys
    // act as they do in vim, instead (e.g., ctrl+f to move forward a page).
    "vintage_ctrl_keys": false,

    // relative_line_numbers will draw each line number as the distance from
    // the current line. Useful in conjunction with Vintage.
    "relative_line_numbers": false,

    // List any packages to ignore here. When removing entries from this list,
    // a restart may be required if the package contains plugins.
    "ignored_packages": ["Vintage",
    ],
}